When it comes to insulation, the higher the R-value, the better insulated your home will be. The Environmental Protection Agency (EPA) recommends an R-value of 30 to 60 for an uninsulated attic and 25 to 38 with existing insulation in Florida. Installing attic insulation is not a simple task, even for a company that offers the best home insulation Florida can offer. ENERGYSTAR recommends an R-38 value for most homes, which translates to approximately 12 inches of insulation.
If you don't have enough insulation, use a measuring tape to measure the depth of insulation in your attic. It's difficult to establish a definitive rule of thumb, but it's common to replace the insulation if it's more than a decade old or if it's damaged or worn out. Although Florida is known for its warm climate, proper attic insulation can help maintain a comfortable temperature in your home all year round, keeping it cooler in summer and warmer in winter. Aerosol foam insulation is recommended for Florida residents due to its high R-value, ability to create an airtight seal, and moisture resistance.
Blown fiberglass installed in the attic has an R-value of 2.2 per inch, so 12 inches would give it an R-value of 26.4.Ultimately, the best type of insulation for your Florida attic will depend on the specific needs and budget of your home. When considering adding insulation to your Florida home's attic, there are three key questions you should ask yourself to ensure the project is successful: What type of construction is my house? What is the state of my attic? What is my budget? With these tips, homeowners can find a reputable attic insulation contractor in Florida and enjoy the benefits of a more comfortable and energy efficient home. The residential insulation map recommended by Energy Star shows that most of Florida is within Zone 2.In addition, some programs may require prior approval or verification of the insulation installation before paying the incentive.
